SPA pH and ALKALINITY
REDUCER
The correct pH and Alkalinity balance is vital to ensure
comfortable bathing conditions, maximum efficiency from
the sanitiser and to help maintain the fabric of the spa
and hot tub. The correct pH reading should be 7.4 – 7.6
and Total Alkalinity between 80 – 150ppm
Instructions
1. Use a good quality test kit to determine the pH and/or the Total
Alkalinity reading.
2. To reduce pH readings add 10g per 1000lts of Spa and Hot Tub
water sprinkling product directly to the water with circulation on.
This application will lower the pH by approximately 0.2
3. Only make one addition of pH and Alkalinity Reducer at a time
and always re-test the water, should a further addition be required
please follow step 1 again.
4. To reduce Total Alkalinity add 15g per 1000lts of Spa and Hot Tub
water with circulation on. Add product to the deepest point of the
Spa / Hot Tub in one application. This application will lower the
Total Alkalinity by approximately 10 – 20 ppm (mg/l)
5. Always re-test the water after each application.
SPA pH and ALKALINITY
REDUCER
The correct pH and Alkalinity balance is vital to ensure
comfortable bathing conditions, maximum efficiency from
the sanitiser and to help maintain the fabric of the spa
and hot tub. The correct pH reading should be 7.4 – 7.6
and Total Alkalinity between 80 – 150ppm
Instructions
1. Use a good quality test kit to determine the pH and/or the Total
Alkalinity reading.
2. To reduce pH readings add 10g per 1000lts of Spa and Hot Tub
water sprinkling product directly to the water with circulation on.
This application will lower the pH by approximately 0.2
3. Only make one addition of pH and Alkalinity Reducer at a time
and always re-test the water, should a further addition be required
please follow step 1 again.
4. To reduce Total Alkalinity add 15g per 1000lts of Spa and Hot Tub
water with circulation on. Add product to the deepest point of the
Spa / Hot Tub in one application. This application will lower the
Total Alkalinity by approximately 10 – 20 ppm (mg/l)
5. Always re-test the water after each application.
