Relax Spa Hot Tub Waterline Cleaner - 500ml
Relax Spa Hot Tub Waterline Cleaner - 500ml - A powerful cleaner for the removal of tide marks in hot tubs.
Why?
Water contaminants can cause unsightly 'tide marks'. Spa Waterline Cleaner has been specially formulated for use on your spas's acrylic shell. It is a non-abrasive, low foaming cleaner.
When?
It is good practice to clean the waterline at least every week or after heavy use. If a waterline tidy mark is visible, then apply and clean as follows:
How?
1. Wear protective gloves and eye protection whilst using this product.
2. Lower the water level sufficiently to allow cleaning of the waterline.
3. Add a small quantity of waterline cleaner to a sponge, apply to affected areas and rub gently,
taking care not to drip product into the spa water.
4. Leave for 2 minutes before gently rubbing again until the tide mark has been removed.
5. Thoroughly remove any remaining residue with a clean dry cloth.
6. Top up water to normal operating level.
How Much?
Use sparingly, cover effected area, leave to stand for 2 minutes.
Relax Spa Hot Tub Waterline Cleaner - 500ml
Relax Spa Hot Tub Waterline Cleaner - 500ml - A powerful cleaner for the removal of tide marks in hot tubs.
Why?
Water contaminants can cause unsightly 'tide marks'. Spa Waterline Cleaner has been specially formulated for use on your spas's acrylic shell. It is a non-abrasive, low foaming cleaner.
When?
It is good practice to clean the waterline at least every week or after heavy use. If a waterline tidy mark is visible, then apply and clean as follows:
How?
1. Wear protective gloves and eye protection whilst using this product.
2. Lower the water level sufficiently to allow cleaning of the waterline.
3. Add a small quantity of waterline cleaner to a sponge, apply to affected areas and rub gently,
taking care not to drip product into the spa water.
4. Leave for 2 minutes before gently rubbing again until the tide mark has been removed.
5. Thoroughly remove any remaining residue with a clean dry cloth.
6. Top up water to normal operating level.
How Much?
Use sparingly, cover effected area, leave to stand for 2 minutes.
